Control Valve
The valves type 8407 have a non invertible globe body single seat
and top guide. Valves are designed according to ASME B16.34 standard. The seat
is screwed on the body. These valves are suitable for a broad variety of
applications. Seat and metal plug are available in stellite facing on request.
Design: The valves
type 8407 have a non invertible globe body single seat and top guide. Valves
are designed according to ASME B16.34 standard. The seat is screwed on the
body. These valves are suitable for a broad variety of applications. Seat and
metal plug are available in stellite facing on request.
Actuator: The valves may be equipped with
pneumatic spring diaphragm, Piston single or double effect pneumatic actuators
can be supplied for special shutoff pressures and electrical actuators.
Accessories: The valve and actuator may be
equipped with any accessory, Such as pneumatic to digital Positioner, Air
filter regulator, stem flushing, solenoid valve, Limit switch, position
transmitter, lock-up valve, booster, top / side mounted hand wheel etc, ask for
details.
Sizes:
- From 1/2'' to 10''
Pressure
ratings: - ANSI 150 #, 300 # and 600 #, higher ratings are
available on request.
Temperature
range: -196°C to 538°C.
·
Spherical bodies with special internal shaping maintain low fluid
velocities for minimizing erosion.
·
Appropriate plug profile guaranties the required flow characteristic.
·
High quality cast bodies tested under hydrostatic pressure.
·
Packing box construction bolted flange type.
·
Control Valve series 8407 approved by IBR 1950 regulations.
Sizes (Inches) |
Ratings available |
Temp (Min) Deg C |
Temp (Max) Deg C |
from 1/2 to 10 |
From 150 to 600 |
-196 |
538 |
8407 Series control valve have invertible globe body single seat
and top guide, designed according to ASME B16.34 & IBR approved.
Sizes (Inches) |
Ratings available |
Temp (Min) Deg C |
Temp (Max) Deg C |
from 1/2 to 10 |
From 150 to 600 |
-196 |
538 |
CV-8407 | 8407 Series control valve have invertible globe body single seat and top guide , designed according to ASME B16.34 & IBR approved. | View PDF |