Bimetallic Thermostatic Steam Trap

UKL the Bi-Thermostatic Bimetallic steam traps, consists of an  independent seat and cone valve, and an external adjustment device that can be used while the trap is functioning, for temperature and flow discharge. The trap also has an integral Y type Strainer.

The bimetallic steam traps consists of two antagonistic [Opposing] thermostats.

The Upper thermostat consists of pair of bimetallic plates guided by the plug’s stem, and the Lower thermostat is formed by one bimetallic sheet that leans and is guided on its edges by the body of the steam trap.

When the temperature starts to rise, the Upper thermostat expands, pressing the plug in the closing direction; at the same time, the lower thermostat arches itself allowing the movement of the valve in the same direction leading to progressive closure of the valve. When the condensate temperature decreases the thermostats act inversely, thereby opening the valve adding pressure balancing feature.

Benefits:

·         Optimum energy efficiency

·         Very long Life: Three times the life of the conventional Thermostatic Trap

·         Resistance to water hammering, corrosive condensate, Freezing

·         Automatic de aeration

·         Works against high back-pressures

·         Works in Superheated steam and High differential pressures

·         Installation in any position

·         This Trap can be used Bi-Directionally

·         These traps allow discharge of condensate up to 40 Degrees Sub-cooled

·         Integral Strainer

These traps prevents excessive heat loss as it is filled with sub-cooled condensate as against the heat loss incurred in Thermodynamic and Ball Float Traps that are filled with Steam/Condensate at saturated temperatures.

The UKL Bi Thermostatic Bi Metallic Traps are available in pressures from 25,45, 64,110 and 215 Bars

Depending on the pressure and temperature conditions, the available models are: UT25 / UG25 / UP45Ti / UG45Ti / UP64Ti , UP110 Ti, UP215 Ti.

Size Range : 15 mm – 25 mm

MOC - ASTM A105 (Forged) / F11 (UP64 & up)

End Connection - Screwed BSP / NPT / SW / FL 150# / 300#

UT25 / UG25/ UP45Ti/UG45Ti

UKL Bimetallic Steam Trap in Forged carbon steel construction as per ASTM A 105

UT-25 Max Op Pr./ Temp : 25 Kg/cm² / 400 ^oC

UT-45 Max Op Pr./ Temp : 45 Kg/cm² / 400 ^oC

UP64Ti / UP110Ti

UKL Bimetallic Steam Trap in Forged alloy steel construction as per ASTM A182 F11

PU-64 Max Op Pr./ Temp : 64 / 110 Kg/cm² / 525 ^oC

UP-110 Max Op Pr./ Temp :  110 Kg/cm² / 525 ^oC

P215Ti

UKL Bimetallic Steam Trap in Forged alloy steel construction as per ASTM A182 Gr.F91

Max Op Pr./ Temp :  215 Kg/cm² / 600 ^oC